Propel S10 - 10 kW outboard motor
Input power: 10 kW
Status:
not available
Versand:
Production stopped
Auf Anfrage
The outboard is available in three different shaft lengths and strengths: 7 kW, 10 kW and 13 kW.
shafttype
Produktkonfigurator
outboard
1 x Propel S10
not available
10 kW
Auf Anfrage
Ausgewählt
Motor
2 x 48V 200Ah LiFePO4
available
20.48 kWh
€6,398.00
Ausgewählt
2 x Batterytechnology 48 V 100 Ah LiFePO4 battery
upon request
4,56 kWh
€5,798.00
2 x Batterytechnology 48 V 200 Ah LiFePO4 battery
available
9,12 kWh
€9,198.00
Battery
1 x CS-Electronic 48V/20A charger waterproof
available
1.150 W
€459.00
Ausgewählt
Accessories
CS-Batteries charging adapter cable M8
available
€16.00
Optional
1 x Battery Monitor BMV-700
available
€154.00
Ausgewählt
1 x BMV-712 Smart with Buetooth and Shunt
available
€223.00
Charger
Main switch 48V
available
€54.00
Optional
Zusammenfassung
1 x Propel S10
Auf Anfrage
2 x 48V 200Ah LiFePO4
€6,398.00
1 x CS-Electronic 48V/20A charger waterproof
€459.00
1 x Battery Monitor BMV-700
€154.00
Gesamtpreis
Auf Anfrage
Eigenschaften Propel S10
Input power
10 kW
comparable performance
25 PS
Voltage
48 V
Noise level
Silent
rotations per minute
1440 rpm
torque
105 Nm
weight
51.2 kg
display
On-board computer with digital display
shafttype
short/normal shaft
shaft length
50 cm
control
remote or tiller
saltwater resistant
yes
cooling
Water
propeller
Stainless steel
tilting mechanism
manual
trimming mechanism
manual
maximum boat weight
5000 kg
Propel - THE innovation in 2022
Propel presented its new and first series of electric motors at the B2B boat show MetsTrade in Amsterdam for the first time in November 2021. An outboard and an inboard were presented in a timeless and modern design.
The Propel team has invested many years of work in the development of the motors. Propel is backed by the British parent company Saietta Group. The motors are also used for electric motorcycles, scooters and buses. The motors are remarkably small, with controllers and cooling even integrated into the housing.
Propel S10 review - the best electric outboard 2023?
Aufgrund der aktuellen Cookie Einstellungen kann das Youtube-Video leider nicht angezeigt werden.
Comparison of outboard motors from 10 kW
|
|
|
|
|
|
|
|
|
|
|
Propel S10 | MPower 11 | ePropulsion X12 | Torqeedo Cruise 12.0 R | Aquamot Trend 11.0 | E-Tech 10 AB | Mitek 15 | Mitek 20 | |
| Preis | Auf Anfrage | 6.999,00 € | 10.999,00 € | 11.149,00 € | 7.789,00 € | 10.699,00 € | 9.499,00 € | 11.999,00 € |
| Verfügbarkeit |
not available
|
available
|
available
|
available
|
available
|
available
|
available
|
available
|
| Versand | Production stopped | 2-3 weeks | 2-3 months | 3-4 business days | 3-4 weeks | 3-4 weeks | 2-3 weeks | 2-3 weeks |
| Input power | 10 kW | 11 kW | 12 kW | 12 kW | 11 kW | 10 kW | 10.5 kW | 13 kW |
| comparable performance | 25 PS | 20 PS | 24 PS | 25 PS | 20 PS | 20 PS | 15 PS | 20 PS |
| Voltage | 48 V | 48 V | 96 V | 48 V | 48 V | 48 V | 48 V | 48 V |
| weight | 51.2 kg | 35 kg | 48 kg | 61.3 kg | 52.2 kg | - kg | 49 kg | 56 kg |
Propel S10 outboard offers high security
-
Fully waterproof to IP67.
-
Safe low voltage of 48 V.
-
Powerful controller from the automotive sector.
-
Good for salt water. The aluminum components have an extra anti-corrosion layer.
. -
Sealed glycol cooling circuit. The Propel engines are therefore suitable for high and long loads. No water enters from the outside (= maintenance free)
. -
Comparable to a 25 hp gasoline outboard motor.
Propel - the Apple of the boating industry
-
Currently there is the side control with separate display. A tiller and a remote control for top mounting will also be available later. The components are connected via cable.
-
Absolutely quiet. No noise, no obstructed transmission.
-
100% maintenance free. No wear and tear. High quality and durable material.
-
The display is easy to read even in sunlight.
-
The motor can be operated steplessly forward and backward. The scope of delivery of the control also includes a key switch and a main switch.
. -
The outboard can be folded up to 60 °. Depending on the payload, the engine can be manually trimmed in 6° increments.
-
Very modern and sleek design. Also the operation of tiller, drive lever and display is very intuitive.
. -
The displays can only show the drive time if batteries from Propel are also used or the batteries have a CAN-BUS interface. Otherwise, a SmartShunt or BMV also goes to display the capacity.
.
Propel S10 - technical features
-
Function fundamentally with batteries from different manufacturers and technologies.
-
Direct drive with enormously high efficiency. Efficiency of 62.1%. (Propeller included!)
-
Most efficient outboard on the market thanks to high-end flow optimization.
-
The Propel batteries provide direct communication (CAN-BUS) between the components. Thus, the remaining capacity can be displayed.
-
Torque of 60 Nm. Up to 105 Nm peak. Speed of up to 1440 rpm.
-
Optimal ratio between propeller size and diameter. 4-blade propeller.
-
3 different shaft lengths: extra short shaft (38.5 cm | 46.8 kg), short/normal shaft (51.2 cm | 48 kg) and long shaft (63.9 cm | 50 kg)
.
The manufacturer Propel
Propel stands for a high level of innovation in the field of electric motor development. Propel offers propulsion systems for boats with inboard or outboard motors. The propulsion systems can be used in various boats and ships on lakes, rivers and seas.
With the help of high-end computer simulations, Propel was able to develop the most efficient motor on the market. To do this, Propel purchased all existing drives and tested them themselves and performed flow analyses. Propel was able to find an optimal balance between propeller size and engine power, as well as get high torque out of it.
More info about Propel electric motors
With Propel, the motor and electronic components are cooled by a closed cooling circuit. This means virtually no maintenance is required and you can maintain maximum performance for extended periods.
Air-cooled motors go out when overheated or poorly ventilated. Not so the water-cooled motors. Normally, water cooled motors are much more expensive. Propel has managed to develop motors with water cooling that can keep up with motors without cooling in terms of price.
Your Propel Dealer in Germany
Greenboatsolutions is the official distributor of the manufacturer Propel from the Netherlands. You can order your new Propel E-Motor directly from us.
The outboards are expected to be available from April / May. First in silver, later probably also in olive green. First come - first serve.
Propel S10 Downloads
Propel S1 Brochure (English)
Propel datasheet and drawing
Wie funktioniert die Bestellung?
Simply click on "Add to cart". In the next step, enter your personal data and choose your preferred payment method.
As a specialist dealer, we will check your order and send you an order confirmation and invoice. After receipt of payment, we will send the desired items directly to the desired delivery address.
Within Germany, the delivery time is 3-4 working days. Of course, you will also receive a tracking link for your order.
Afterwards, we are always available personally for questions about assembly. Of course, we also provide instructions, tips and soon also explanatory videos.
For all products in our range, we offer a 2-year warranty - for some products even more.
In case of complaints, we are your contact person, we help you to ensure that everything runs smoothly. You can always reach us by email or phone. We also provide support for possible spare parts at any time. Your boat is our drive.
Your advantages using greenboatsolutions
Few clicks will save you a lot of time and stress!
You will get a result within 5 minutes.
You compare nearly 600 different electric motors.
You have an overview of more than 30 manufacturers.