ePropulsion H-140 inboard motor
ePropulsion H-140
ePropulsion H-140
ePropulsion H-140 - image 0

ePropulsion H-140 inboard motor

Input power: 140 kW

Status:

upon request

Shipping:

2-3 months

On request

applepay
banktransfer
klarnapaylater
klarnapaynow
creditcard
paypal
klarnasliceit

Internal combustion engine H-140 with 140 kW power, suitable for boats and ships between 30 and 50 meters. The displacement should not exceed 70 tons, a double system with two engines is also possible. The electric drive is water-cooled (2-circuit system).

The engine must be installed and regularly maintained by a high-voltage technician. Upon request, we also offer installation.


Properties ePropulsion H-140

kill switch

Yes

Input power

140 kW

comparable performance

280 PS

Voltage

540 V

torque

1121 Nm

rotations per minute

1145 rpm

weight

250 kg

Noise level

almost silent

display

On-board computer with digital display

Speed control

infinitely variable

saltwater resistant

yes

cooling

water

propeller

maximum boat weight

70000 kg

length

443 mm

width

387 mm

height

443 mm

control

Natural gas / Pinne


H-140 inboard motor by ePropulsion

  • Housing and connector are waterproof according to IP 67.

  • Approximately 60% space savings for the engine. The battery tends to take up more space than the previously installed tank.

  • A battery bank can be designed and customized upon request. There is no "standard" solution. External batteries cannot be used.
  • Significantly easier maintenance and installation than with a conventional diesel.

H-140 inboard motor by ePropulsion

EPropulsion H-140 - Comfortable operation

  • Infinitely variable speed control leads to efficient consumption.

  • On the smartphone, location, speed, battery capacity, charging time and many other information can be accessed.

  • Plug & Play connection to the batteries. (facilitates installation)

  • The data from the battery and motor can be accessed from anywhere via a cloud system.

  • Tracking and evaluation of trips possible. (Also possible across multiple accounts)

  • Guest accesses can be set up for the IoT system and there are fleet reports. Therefore, the drives are particularly suitable for boat rentals.

ePropulsion H-140 - Comfortable operation

Technology of ePropulsion H-140

  • Low weight of the motor of only 250 kg. Significantly lighter than comparable 280 PS diesel engines. In addition, there is the battery or the generator in a hybrid drive.

  • The ePropulsion H-140 kW is one of the few inboard engines that is produced in a high-volume production line. Thanks to its Asian origin, the prices are competitive compared to the competition.

  • Compact motor design. However, in addition to the motor, a separate controller and another control unit are required. This makes the installation significantly more complex than with the I-Series. We recommend contacting us for your project.

  • The engine is not maintenance-free. High-voltage systems need to be serviced regularly. This should be taken into account when purchasing.

Technology of ePropulsion H-140

Range of the ePropulsion H-140

Driving time and range naturally depend on the battery and the 50-ton ship being operated. With a 140 kWh battery, the following range can be achieved:

  • At 1/2 power, the driving pleasure lasts for a 2-hour ride at a decent cruising speed. This concept is particularly suitable for the ferry concept with regular charges.

  • Those planning longer trips on the water can go much further with less power. At 1/4, 140 kWh is more than enough for a 4-hour ride.


The battery should be determined depending on the boat weight and the planned range.

Range of the ePropulsion H-140

Hybrid drive with the ePropulsion H-140

Another exciting application field is the use of electric drive without a battery system. Especially for ships that are in continuous operation, the permanent drive via generator can be worthwhile. The big advantage is the extremely high efficiency of the electric motor at 96%.

In an example project by ePropulsion, up to 300 liters of diesel per day can be saved thanks to the H-140 electric motor, even for a ship that is on the move daily. For the operator, the conversion is often worthwhile within the first few years and the ongoing maintenance costs are also much lower.

Hybrid drive with the ePropulsion H-140

More information about the H-series inboard engines

ePropulsion Technology Limited produces electric boat drives without gears and with a high-quality brushless DC motor. The motors are therefore extremely quiet and low-maintenance. ePropulsion offers boat motors with a wide range of functions such as GPS. Of course, suitable lithium-ion batteries and chargers are also available in the range.


The motors in elegant design in combination with the powerful batteries ensure long-lasting performance. They are easy to handle, safe and technically up to date. They are therefore ideal for getting started in e-mobility on the water.

More information about the H-series inboard engines

Information about the control of the H-140

The smart throttle from ePropulsion comes with a 5" display for the best possible overview of all driving values. The display is therefore significantly larger than that of the smaller outboard motors. Visually, the color display definitely has a lot to offer.


For publication, there will be a top and side throttle. Each in single or dual version. A twin system is therefore possible for each of the inboard engines. Further controls have already been announced.

Information about the control of the H-140

The manufacturer ePropulsion

ePropulsion is an innovative manufacturer of electric propulsion systems with the aim of advancing e-mobility in water sports. The idea was conceived by four young engineers in Hong Kong in 2012.


With the goal of making environmentally friendly, clean and quiet motors competitive, they have since designed numerous models, including the Spirit 1.0, Navy 3.0 and Navy 6.0 EVO. The models are characterized by top price-performance ratio. The new additions are the inboard models I-10, I-20, I-40 and H-100.

The manufacturer ePropulsion

We would be happy to take on your project - contact us now!

Open questions?

Questions about ePropulsion H-140

How does the order process work?

1. Ordering and payment

Simply click on "Add to cart". In the next step, enter your personal data and choose your preferred payment method.

As a specialist dealer, we will check your order and send you an order confirmation and invoice. After receipt of payment, we will send the desired items directly to the desired delivery address.

2. Delivery and installation

Within Germany, the delivery time is 3-4 working days. Of course, you will also receive a tracking link for your order.

Afterwards, we are always available personally for questions about assembly. Of course, we also provide instructions, tips and soon also explanatory videos.

3. Warranty and questions

For all products in our range, we offer a 2-year warranty - for some products even more.

In case of complaints, we are your contact person, we help you to ensure that everything runs smoothly. You can always reach us by email or phone. We also provide support for possible spare parts at any time. Your boat is our drive.

Your advantages using greenboatsolutions

easy.

Few clicks will save you a lot of time and stress!

fast.

You will get a result within 5 minutes.

comparable

You compare nearly 600 different electric motors.

transparent.

You have an overview of more than 30 manufacturers.

contact image